Polaris Ranger 3" IRS & 2" SRA Lift Systems Xtreme Products’ Polaris Ranger lift system is loaded with features. The front lift uses CNC machined aluminum spacers that are designed to prevent coil misalignment and shifting. This prevents the coils from rubbing or binding on the struts. The system comes with a “strut spacer” to make installation simple. This spacer has a very important purpose and that is to make sure you have both struts set at the proper height in the knuckle. Failure to get the struts set properly will cause the bike to handle erratic or an axle to over extend. The rear is lifted using brackets that relocate the top of the shocks. Relocating the attachment points to allow for more lift and some geometry change using technology incorporated on other lifts by Xteme. Sway bar extension links putting the sway bar back in proper position complete the kit Combine this lift with a set of larger, more
aggressive tires for the ultimate in off-road performance.
The increased ground height, fender clearance, payload capacity, and handling
improvement will make you glad you took your Polaris Ranger to the
|
||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||
